Discussion Forum
Hopefully everything will work smoothly for you – however, if there is something wrong, please take a moment to email us (forum@badminton-coach.co.uk) so that we can put it right !
Please do not SPAM this forum – anyone found posting non-badminton related messages or ADVERTISING without permission will be removed without notice and may be banned from using the forum in the future.
Membership of this Badminton Discussion Forum is FREE
To join, just click the Register button just BELOW on the right. Please note however that any strange email addresses (lots of random letters etc) with an obscure user name will be deleted.
6:01 pm
December 10, 2013
Hi All,
This is my first post and wondered if you could help.
I have Voltric 80 which I had restrung about 3 months back with BG80 string at 23lbs, I play in a mid division, local plastic league, broke a string last week and had the racquet restrung to the same tension but with BG65ti for added durability.
The problem I now have is that the strings are constantly moving out of line, took it back to the stringer who looked at it and said they had done their job properly and didn't know why the strings were moving, phoned Yonex UK who weren't interested as the racquet is French (bought from Decathlon in the UK).
Has anyone got any ideas why the strings are moving?
Thanks,
Paul
8:31 pm
December 31, 2011
Hi Woody,
Firstly, welcome to the forum.
23lbs is a reasonable tension – but some might consider it to be at the lower end of things. At that tension I would expect the strings to move – especially if you slice your shots. I think the main issue (and others will be along to correct me if I am wrong) is the plastic shuttles…in most cases they are not very good to play with and they are quite hard on the strings. This is probably why your strings broke and why they move.
TBH, I am not surprised you didn't get anything from Yonex…the racket (unless the frame is busted or twisted) is not going to have any effect on the strings…which after all were not the original strings!
Both BG80 and BG65 are good strings. BG80 is my favourite and I have it strung at 26lbs…but then I only play with feathers.
10:41 pm
February 15, 2011
Paul
This is very interesting. First of all I wasn't aware that rackets purchased from Decathlon in Uk do not fall within Yonex UK remit, most enlightening!
I have been stringing rackets for 30 years and cannot recall a time when I have strung a racket at 23lbs for a player using plastic shuttles. The danger of high tension coupled with playing with plastic shuttles have been discussed before but there are always exceptions to the rule. Mark, whom I test rackets with strings his own rackets and regularly strings up to 32lbs and he only plays with plastic shuttles. However, in general I do not advocate stringing beyond 22lbs.
That said Paul is obviously struggling with his racket so let's help a little further…
1) there is a difference between BG65Ti and BG80. BG80 in a thinner gauge string but with a bit more bite which means there is less movement.
2) Unless you have used this stringer on many occasions then we have to ask the question about consistency of their stringing.
3) the fact that strings are moving a lot suggests (but I can't be sure) you are hitting with a slice action which will inevitably reduce your power and accuracy. You could do with checking this out as it could save you a lot of heartache in the future.
Whilst we all agree that you would do better playing with feather shuttles, we also have to be realistic and accept that is what you currently use for whatever reasons. And that's fine with me.
Occasionally a player mishits a shot which results in string breakage. It's inevitable. However, if this became a regular occurance I would check that the stringer is replacing grommets in key positions. I've known stringers turn grommets rather than replace them. For me it's not worth the risk and I always check under an eye glass before stringing the racket. Yes, it takes a little longer in preparation but I want to ensure a player receives the same stringing job I do for myself.
Paul, hopefully this will help you to identify what's happening and watch out for future breakages.
Paul
7:29 am
October 28, 2012
Intresting topic
I have a voltric 80 strung with bg 68 ti at 23lbs (playing with feathers) and have same problem with strings, but my carlton fireblade tour strung at same time with same strings and tension is fine.
voltric was strung with bg66um before and they never moved then so thought it might be something to do with the titanium coating making them slip, strange how it doesnt slip on the carlton though.
Lee
1:49 pm
November 8, 2011
In my experience (both restringing myself and by other commercial restringers) it can take a week or so for the strings to settle properly and get into the 'groove' so to speak, during this time strings tend to slide around a lot particularly when playing any slice. This effect is more pronounced on the more slippy coated strings such as BG65TI and much less on the rougher coated strings like BG80 (aka cheese grater coating!).
You may want to play with them for a week or two and see if it improves/settles for you before cutting/restringing again but I think you will always find that 65TI will move around more in comparison to BG80 at any tension as the textures/coating of the strings are almost polar opposites.
4:38 pm
December 10, 2013
4:51 pm
December 10, 2013
Thanks for all of your responses, with regard to plastic shuttles here in Sheffield we have a plastics and a feathers league both run by the local badminton association, I joined the most local club I could find who just happen to play in the plastics league hence me playing with plastic shuttles.
I have read your reviews on racquets and have bought a couple based on the reviews but as you say feathers are better to play and most racquet reviews are based around feather players.
In our local men's league there are 19 feathers teams and 35 plastics teams so it seems we are in the majority (certainly around this neck of the woods) but little info is provided for us.
I will let strings settle a little and try a different stringer if I'm still not happy.
Thanks again.
10:42 pm
December 10, 2013
Hi,
Just to finish this off, I left the racquet for a few weeks but the strings were still moving quite a bit so took it to a different stringer who checked it out and said the original restring had been done correctly but with a two piece restring, he said he would have done it with one piece. Anyway had it restrung with BG80 and it’s back to being the best racquet I’ve ever had.
10:24 am
February 15, 2011
Woody
This is interesting. The recommended string pattern on any Yonex racket is two piece. Whilst your new stringer may prefer one piece stringing, by using a different pattern this would normally invalidate the warranty. However, as you have purchased through Decathlon with a French code on your racket, it's likely that you will not be covered under UK warranty anyway.
The bottom line here is that if your racket is now playing the way you want it to play, then I am delighted for you and you should stay with this stringer.
Paul
Most Users Ever Online: 676
Currently Online:
178 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Matthew Seeley: 391
Peter Warman: 239
Ed: 186
Dobbie98: 165
gingerphil79: 158
Member Stats:
Guest Posters: 10
Members: 1529
Moderators: 1
Admins: 2
Forum Stats:
Groups: 2
Forums: 8
Topics: 581
Posts: 4716
Newest Members:
ehsianturi, wkt_1, merlyn, Suzena, ManojModerators: Design: 0
Administrators: AngieS: 0, Paul Stewart: 1283